Click for Home Page
Vibratory Feeders
Electromagnetic Vibrator Sys.
Factory Automation System
Inside-Tooled Screw Feeder
Outside-Tooled Screw Feeder
Washer Feeder
Rivet Sorter
Electronic Component Feeder
T-Bolt Feeder
Bowl Drive
Inline Drive
Vibratory Hopper
Misc. System Components

Accu-Tech Automation logo   

   Products   Documentation   About Us   News & Events   Contact Us   Home   
Accu-Tech Automation Home Page  >>  Products  >>  Coating

Vibratory Feeder Bowl Coating Protects Parts from Abrasion, Hydrostatic Tension and Slippage from Oil

Can Reduce Decibel Levels by 10db

Bowl coating can reduce decibel levels by 10db or more while it protects parts and Feed Bowl from abrasion, defeats hydrostatic tension, and slippage from oil.

A removable deflector is used in the bottom of a coated bowl so that the edge of the coating is behind the wear area helping to prevent tearing.

The type of coating used will be selected from the following list depending on your production needs:

  • Smooth or textured
  • Sprayed or bonded
  • Urethane
  • Surlyn ®
  • Teflon ®
  • UHMW
  • Brushelon ®
  • Halar ®
  • Even stainless and carbide

back to top


Products   |   Documentation   |   About Us   |   News & Events   |   Contact Us   |   Home

Accu-Tech Automation, Inc.       3601 E. New York St.       Indianapolis, Indiana 46201       (317) 352-1490


© 2004-2009 Accu-Tech Automation, Inc. All Rights Reserved.